469
CHAPTER 9 DEDICATED INSTRUCTIONS
9
9.17 Z(P).RTMWR (Clock Data Write to Programmable Controllers on Other Stations)
*1 Local devices and file registers for each program cannot be used as devices in setting data.
(2) Clock data (All set by the user)
Clock data cannot be written when system protect is applied to the target station CPU.
(D2)
The own station's device that is turned on for one scan upon completion of the
instruction
(D2)+1 also turns ON if the instruction execution has failed.
Bit
Device Item Setting data
(D1)+0 Change pattern
In (D1)+1 to (D1)+4, specify data to be changed.
0: Do not change
1: Change
(D1)+1
Clock data
Specify new clock data as BCD codes.
The range available for 4-digit year writing is 1980 to 2079.
(D1)+2
(D1)+3
(D1)+4
Setting data
*1
Description Data type
Year (Last 2 digits)
Month
Day
Hour
Minute
Second
Day of week
Year (First 2 digits)
b7b8tob15
0
b6 b5 b4 b3 b2 b1 b0
(D1)+1
(D1)+2
(D1)+3
(D1)+4
Month (01
H to 12H)
Hour (00
H to 23H)
Second (00
H to 59H)
Day (01
H to 31H)
Minute (00
H to 59H)
00
H (Sun.) to 06H (Sat.)
Day of week (00
H to 06H)
Year (19
H
or 20
H
), First 2 digits
Year (00
H
to 99
H
), Last 2 digits
b15 b8 b7to b0to
To Next Page
Loading...
