Mitsubishi Electric MELSEC-Q Series - Page 525

523
CHAPTER 10 TROUBLESHOOTING
10
10.2 Error Codes 10.2.2 Error code list
E2B0
H
Network module error The hardware has failed. • Please consult your local Mitsubishi representative.
E300
H
to
E302
H
E310
H
E311
H
E320
H
to
E325
H
E330
H
to
E333
H
E340
H
to
E343
H
E350
H
E361
H
to
E36D
H
E380
H
to
E383
H
E390
H
to
E397
H
E3A0
H
E3A1
H
E3B0
H
to
E3BA
H
E3BB
H
Max. number of stations
exceeded
The total number of stations
exceeded the setting range.
• Assign some stations to another network so that the
total number of stations will be within the setting range.
E3BC
H
Network line error
Baton (or token) passing
stopped due to a
communication line error or a
CC-Link IE Controller
Network module error.
• Check the network status in the CC IE Control
diagnostics.
• If the error persists even after taking the above action,
please consult your local Mitsubishi representative.
E3BD
H
Network module error The hardware has failed. • Please consult your local Mitsubishi representative.
E3C0
H
to
E3C2
H
E501
H
to
E503
H
Error code Error Error detail Corrective action