54
*1 Whether the area is readable/writable or not is shown.
R: Read only, W: Write only, R/W: Readable/Writable
● Values stored in the buffer memory are cleared when power is turned OFF and then ON or when the CPU module is
reset.
● When a value in a one-word area is changed to 65536 or higher, the count stops at 65535 (FFFF
H
).
2946 to 65535
(B82
H
to FFFF
H
)
Use prohibited System area — — —
Address
(Dec. (Hex.))
Application Name
Initial
value
Read/
Write
*1
Reference
section
To Next Page
Loading...
