Mitsubishi Electric MELSEC-Q Series - Page 613

611
APPENDICES
A
Appendix 3 Functional Upgrade of CC-Link IE Controller Network
—: Irrelevant to serial No. or software version
*1 Other than the Q02U/Q03UD/Q04UDH/Q06UDHCPU can be used from the first released products.
*2 Other than the Q02U/Q03UD/Q04UDH/Q06UDH/Q13UDH/Q26UDHCPU can be used from the first released products.
*3 CPU modules that can be used differ depending on the connection path. ( Page 107, Section 4.3.1)
(6) For Safety CPUs
—: Irrelevant to serial No. or software version
Group cyclic transmission function
Function
version D or
later
10042 or
later
*2
Version
8.68W or later
Version 1.04E
or later
Page 83,
Section 4.1.8
Compatible with Redundant CPUs
• Pairing setting for redundant systems
Not available
Page 138,
Section 4.7.1
Points for link dedicated instructions
(READ/SREAD/WRITE/SWRITE) increased to 8192
words
• Channels 9 and 10 specified for use of the own
station
• Read/write data length specified to 961 words or
more
—
——
Page 324,
CHAPTER 9
Modified CC IE Control diagnostics
• Display of stations with no parameter setting
Version
8.68W or later
Version 1.04E
or later
Page 528,
Section 10.3.1
Supporting transient requests from CC-Link IE
Controller Network compatible devices, and new CC-
Link dedicated instructions added
• RIRD/RIWT
10092 or later — —
Page 324,
CHAPTER 9
Increase of send points by mounting multiple network
modules of the same network No.
—
Version 8.76E
or later
Version 1.07H
or later
Page 84,
Section 4.1.9
Module error history collection function
12052 or later
11043 or later
Not available
Version 1.09K
or later
Page 511,
Section 10.2.1
Send points extension function 12052 or later
Version 1.34L
or later
Page 180,
Section 6.2
Supporting the IP packet transfer function 14112 or later
14022 or
later
*3
Version 1.98C
or later
Page 106,
Section 4.3
Function
First 5 digits of serial
No.
Programming tool version
Reference
section
CC-Link IE
Controller
Network
module
CPU
module
GX
Developer
GX Works2
Compatible with QS001CPU
Function
version D or
later
—
Version 8.65T
or later
Not available
Page 40,
Section 2.3
Modified CC IE Control diagnostics
• Display of stations with no parameter setting
Page 528,
Section 10.3.1
The number of refresh parameter settings per module
(except for SB/SW) is increased to 64.
14052 or later
Version 8.107M
or later
Page 204,
Section 6.5.1
Function
First 5 digits of serial No.
Programming tool
version
Reference
section
CC-Link IE
Controller
Network
module
CPU
module
GX
Developer
GX Works2