EasyManua.ls Logo

Mitsubishi Electric MELSEC-Q Series - Page 615

Mitsubishi Electric MELSEC-Q Series
674 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
613
APPENDICES
A
Appendix 4 Comparison Between CC-Link IE Controller Network and MELSECNET/H
Appendix 4.1 Comparison of specifications
*1 For the safety CPU with a serial number (first five digits) of "14051" or earlier, the number of refresh parameter settings
per module (except for SB/SW) is 8.
Station-to-station distance (Max.) 550m (Core/Clad = 50/125 (µm))
200m to 2km (Depending on cable to be used
and communication speed)
Max. number of networks 239
Max. number of groups 32
Transmission path Duplex loop
Number of refresh parameter
settings per module (Except
SB/SW)
• Universal model QCPU (other than
Q00UJCPU, Q00UCPU, and Q01UCPU): 256
• High Performance model QCPU, Process
CPU, Redundant CPU, Q00UJCPU,
Q00UCPU, Q01UCPU, and safety CPU
*1
: 64
• Basic model QCPU: 8
64 (8 when Basic model QCPU or safety CPU is
used)
Link scan time
The link scan time and transmission delay time differs between CC-Link IE Controller Network and
MELSECNET/H.
When replacing the system, check the link scan time and transmission delay time of the CC-Link IE
Controller Network. ( Page 244, CHAPTER 7)
Transmission delay time
Max. number of mountable
modules
Up to 4 (Varies depending on the CPU module
used. ( Page 40, Section 2.3)
Up to 4 (up to 1 when a Basic model QCPU or
safety CPU is used)
Number of occupied I/O points
• 1-slot type: 32 points (Intelli.: 32 points)
• 2-slot type: 48 points (I/O assignment: Empty first half: 16 points, Latter half: 32 points for intelli.)
External
power
supply
Voltage 20.4V to 31.2V DC
Current 0.28A 0.20A
Terminal screw size M3 screw
Applicable
solderless terminal
R1.25-3
Applicable wire size
0.3 to 1.25mm
2
Tightening torque 0.42 to 0.58 N•m
Allowable
momentary power
failure time
1ms (Level PS1)
Noise immunity By noise simulator of 500Vp-p noise voltage, 1µs noise width, and 25 to 60Hz noise frequency
Internal current consumption
(5VDC)
• QJ71GP21-SX: 0.85A
• QJ71GP21S-SX: 0.90A
Be sure to consider the power capacity before
installing the module.
• QJ71LP21-25: 0.55A
• QJ71LP21S-25: 0.55A
External dimensions
• 1-slot type: 98 (H) × 27.4 (W) × 90 (D) [mm]
• 2-slot type: 98 (H) × 55.2 (W) × 90 (D) [mm]
Weight
• QJ71GP21-SX: 0.18kg
• QJ71GP21S-SX: 0.28kg
• QJ71LP21-25: 0.11kg
• QJ71LP21S-25: 0.20kg
Item CC-Link IE Controller Network MELSECNET/H

Table of Contents

Other manuals for Mitsubishi Electric MELSEC-Q Series

Related product manuals