Mitsubishi Electric MELSEC-Q Series - Page 624

622
SB0043 Online switch (host) SB0043 Online switch (own station)
None
SB0044 Station setting (host) SB0044 Station setting (own station)
SB0045 Setting information (host) — —
—
Delete the sequence
program for the
corresponding part.
SB0046
Data link operation
designation result (host)
——
SB0047 Baton pass status (host) SB0047
Baton pass status (own
station)
None
SB0048
Control station status (host)
SB0048
Control station status (own
station)
Remote master station status
(host)
SB0049 Host data link status SB0049
Data link status of own
station
SB004A Host CPU status (1) SB004A Own station's CPU status (1)
SB004B Host CPU status (2) SB004B Own station's CPU status (2)
SB004C
Cyclic transmission start
acknowledgment status
SB004C
Cyclic transmission start
accept status (own station)
SB004D
Cyclic transmission start
completion status
SB004D
Cyclic transmission start
completion status (own
station)
SB004E
Cyclic transmission stop
acknowledgment status
SB004E
Cyclic transmission stop
accept status (own station)
SB004F
Cyclic transmission stop
completion status
SB004F
Cyclic transmission stop
completion status (own
station)
SB0050
Cyclic transmission start
acknowledgment status
SB0050
Cyclic transmission start
accept status (system)
SB0051
Cyclic transmission start
completion status
SB0051
Cyclic transmission start
completion status (system)
SB0052
Cyclic transmission stop
acknowledgment status
SB0052
Cyclic transmission stop
accept status (system)
SB0053
Cyclic transmission stop
completion status
SB0053
Cyclic transmission stop
completion status (system)
SB0054 Parameter receive status SB0054 Parameter receive status
SB0055 Received parameter error SB0055 Received parameter error
SB0056 Communication status SB0056 Communication status
SB0057 Parameter type — —
—
Delete the sequence
program for the
corresponding part.
SB0058
Operation designation at fault
of control station
——
Operation designation at fault
of (multiplexed) remote
master station
——
SB0059 Low-speed cyclic designation — —
SB005A Parameter type 2 SB005A Parameter type
SB005B Asynchronous END setting — —
SB005C I/O master station (Block 1) SB005C I/O master station (Block 1)
None
SB005D I/O master station (Block 2) SB005D I/O master station (Block 2)
SB0064 Reserved station designation SB00C0
Reserved station
specification
(No. changed)
None
SB0068 Communication mode SB0060 Communication mode
MELSECNET/H CC-Link IE Controller Network
Compatibility
Precautions for
replacement
No. Name No. Name