634
SW00CD
Line error on the reverse loop
side
SW006A
SW006B
OUT-side line error
occurrence rate (Max.)
OUT-side line error
occurrence rate (present.)
(Content
changed)
• This operation in the
MELSECNET/H can be
substituted by OUT-side
line error occurrence rate
in the CC-Link IE
Controller Network
module.
• The station No. for the
station that receives an
error frame at OUT-side
can be checked by
SW0130 to SW0137 and
SW0150 to SW0157.
SW00CE Number of loop switches SW006E Number of loop switches
(No. changed)
None
SW00CF Loop switch data pointer — — —
Delete the sequence
program for the
corresponding part.
SW00D0 to
SW00DF
Loop switch data
SW0064
SW0065
Own station's loop status
Loopback information
(Content
changed)
• The cause of loopback
can be checked by Own
station's loop status
(SW0064).
• The loop status of a
network can be checked
by Loopback information
(SW0065).
SW00E0 to
SW00E7
Switch request station — —
—
Delete the sequence
program for the
corresponding part.
SW00E8 to
SW00EB
Module type of each station — —
SW00EC
Low-speed cyclic
transmission start execution
results
——
SW00EE Transient transmission error SW006F Transient transmission error
(No. changed)
None
SW00EF
Transient transmission error
pointer
——
(Content
changed)
The error history can be
checked by CC IE Control
diagnostics.
SW00F0 to
SW00FF
Transient transmission error
history
——
SW01C4
Remote sub-master station
switching result
——
—
Delete the sequence
program for the
corresponding part.
SW01C8 Send LY device number — —
SW01C9 Receive LX device number — —
SW01CC Send LB device number — —
SW01CD Receive LB device number — —
SW01CE Send LW device number — —
SW01CF Receive LW device number — —
SW01E0 to
SW01E3
Network type consistency
check
——
MELSECNET/H CC-Link IE Controller Network
Compatibility
Precautions for
replacement
No. Name No. Name
To Next Page
Loading...
