640
The following is an interlock of a communication program using the cyclic transmission status of the own
station and the station number 2.
Using an existing sequence program without change may not be allowed due to some reason such as link scan time
difference between CC-Link IE Controller Network and MELSECNET/H.
Be sure to check the operation.
MELSECNET/H
SB0047: Baton pass status (host)
SB0049: Host data link status
SW0070: Baton pass status of each station
SW0074: Cyclic transmission status of each station
Communication program with Station No.2
CC-Link IE Controller Network
SB0047: Baton pass status (own station)
SB0049: Data link status of own station
SW00A0: Baton pass status of each station
SW00B0: Cyclic transmission status of each station
Communication program with Station No.2
SB0020: Module status
To Next Page
Loading...
