642
(c) Example of program replacement
A program used for the following MELSECNET/H system is assumed to be reused.
• Application example in MELSECNET/H (before replacement)
When M152 turns ON, data in D750 to D753 of station No.1 (own station) are sent to logical channel 15 of
all stations (target station).
• Application example in CC-Link IE Controller Network (after replacement)
When M152 turns ON, data in D750 to D753 of station No.1 (own station) are sent to channel 5 of all
stations in group No.1 (target station).
*1 Group No. setting: Page 180, Section 6.2
MELSECNET/H network No.1
SEND
Channel 3
Logical channel 15 (Channel 5)
Logical channel 15 (Channel 1)
Program for logical
channel setting
Program for logical
channel setting
RECV
RECV
Station No.1 Station No.2 Station No.10
CPU module CPU module CPU module
MELSECNET/H
network module
MELSECNET/H
network module
MELSECNET/H
network module
CC-Link IE Controller Network
network No.1
CPU module
SEND
Channel 3
RECV
RECV
CPU module
Group No.1
*1 Group No.1 *1
CPU module
CC-Link IE
Controller
Network module
CC-Link IE Controller
Network module
CC-Link IE Controller
Network module
Station No.1 Station No.2 Station No.10
Channel 5 Channel 5
To Next Page
Loading...
