Mitsubishi Electric MELSEC-Q Series - Page 648

646
Ex.
Quantity setting parameter sheet ( Page 651, Appendix 5.2)
Network Type
CC IE Control (Control Station)
CC IE Control (Normal Station)
CC IE Control Extended Mode (Control Station)
CC IE Control Extended Mode (Normal Station)
CC IE Control (Control Station)
CC IE Control (Normal Station)
CC IE Control Extended Mode (Control Station)
CC IE Control Extended Mode (Normal Station)
Starting I/O No.
(Range: 0000
H
to 0FE0
H
) (Range: 0000
H
to 0FE0
H
)
Network No. (Range: 1 to 239) (Range: 1 to 239)
Total Stations
(Range: 2 to 120)
(For the control station only)
(Range: 2 to 120)
Group No. (Range: 0 to 32) (Range: 0 to 32)
Station No. (Range: 1 to 120) (Range: 1 to 120)
Mode
Online
Offline
H/W Test
Self-Loopback Test
Circuit Test (for the control station only)
Test between Station
Online
Offline
H/W Test
Self-Loopback Test
Circuit Test (for the control station only)
Test between Station
Station No. setting
method
Specify Station No. by Parameter
Specify Station No. by Program
Specify Station No. by Parameter
Specify Station No. by Program
(For the control station only)
Contents filled in are set to network parameter quantity setting.
Item
CC-Link IE Controller Network module
No. No.