MKS MF1 - Page 38

Chapter 4: USB Setup Interface
38
Com Interface Object [ComIfc; ObjId=39]
Name
Par.
Type
Description
Address Inst Defines the device address by the rotary switches.
SoftwareAddress Inst
f the software address is < 100 the rotary switches address is ignored and the
software configurable address is used.
Baudrate Inst Defines the baud rate for the communication.
Parity Inst
Define the parity setup.
0 => none
1 => even
2 => odd
DataBits Inst Define the data bits. Possible values are 7 or 8.
StopBits Inst
Define the stop bits.
0 => 1,5 Stop Bits
1 => 1 Stop Bit
2 => 2 Stop Bits
Config Inst reserved
FailsaveTimeout Inst Timeout definition.
SetDefault Func Reset object to default values
RestartComIfc Func restart ComInterface
Network Interface Object [NetIfc; ObjId=40]
Name
Par.
Type
Description
IpAddress Inst reserved
SubnetMask Inst reserved
Gateway Inst reserved
Dhcp Inst reserved
Dns1 Inst reserved
Dns2 Inst reserved
HostName Inst reserved
DomainName Inst reserved
SmtpServer Inst reserved
SmtpUser Inst reserved
SmtpPswd Inst reserved
Config Inst reserved
SetDefault Func reserved
RestartNetIfc Func reserved
Hardware Object [Hardware; ObjId=41]
Name
Par.
Type
Description
ChnId Inst Name of Hardware Channel
M Inst Calibration M value
B Inst Calibration B value