5.2.3 Working position
1. To get a good and comfortable
working position you can
lowering the platform about 1-
1,5m under finished floor.
5.2.4 Fitting the inner part
1. To fit the inner part of the
threshold, push down the
threshold so that the outer
part is firmly pressed to the
finished floor. Note! If the floor
is not finished see 3.1 and
5.1.2 you must use a spirit
level when you fix the inner
part.
2. Fix the threshold from inside,
use 8x 100223.
3. Installation is finished.
To Next Page
Loading...