35
MC2000 – Assembly Instruction Manual
Fixing lift well
Sills
1. Fasten the lift well in the pit with bolts. One
bolt for each guide rail and two in the notch
of the door frame.
1. Lift or hang off the lower door (landing 0)
te
mporarily and install the sill.
2. Install the door opener/door closer for land-
ing 0.
3. Secure the sills on all landings with screws.
4. Check that the opening between the sill
and the door
panel does not exceed 6 mm.
If the opening is wider, fit the door plate
onto the inside of the door. This does not
apply to landing 0.
5. Placing of door plate.
To Next Page
Loading...