Motala MC2000 - Attach the Traveling Cable; Sensitive Edge Cable

MOTALA MC2000 – Updated version of the platform wall
Instruction
© 2012 Motalahissar AB 5 (14) IQ56-04 Rev: B
Attach the traveling cable
1. Tread the traveling cable through
the hole (1) and fix it with the
cable clamp 730764, use 1x
100132.
2. Note, no cables are visible in this
illustration.
Sensitive edge cable
1. Thread the cable from the floor
sensitive edge contacts through
the hole. Stretch it and lock it
with a cable tie.
2. Note, no cables are visible in this
illustration.