Motala MC2000 - Check witch screws are not going in to the sandwich panel; Modify sandwich panel

Platform floor – Installation instruction
© 2013 Motala Hissar AB 3 (4) IQ56-17 Rev: -
4. INSTALLATION
4.1 Preparation
4.1.1 Check witch screws are not
going in to the sandwich panel.
Make a mark on the sandwichpanel
for each screw that don’t goes in to
the panel because of the sheet
metal flange.
4.1.2 Modify sandwich panel
Modify the sandwich panel flange
so that the screw head can pass by
into the wool.