Device Configuration 5 - 119
Figure 5-70 Profile Security - Remote VPN Client tab
37. Refer to the following fields to define Remote VPN Client Configuration settings:
38. Refer to the following fields to define the Remote VPN Client Peer list.
39. Select OK to save the updates made to the Remote VPN Client screen. Selecting Reset reverts the screen to its last saved
configuration.
40. Select the Global Settings tab.
The Global Settings screen provides options for Dead Peer Detection (DPD). DPD represents the actions taken upon the
detection of a dead peer within the IPSec VPN tunnel connection.
Shutdown Select this option to disable the remote VPN client. The default is disabled.
Transform Set Configure the transform set used to specify how traffic is protected within the crypto ACL
defining the traffic that needs to be protected. Select the appropriate traffic set from the
drop-down menu or click the icon next to the drop-down menu to create a new transform
set.
IKEV2 Peer Use the drop-down menu to select the remote IKE v2 peer. Use the icon next to the drop-
down to create a new peer.
Priority Use the spinner to set the priority in which a remote peer is connected. The lower the
number the higher the priority.
To Next Page
Loading...
