Motorola WiNG 5.5 - L2 Tpv3 Tunnels

Statistics 13 - 93
5. Select the Refresh button to update the statistics counters to their latest values.
13.3.15 L2TPv3 Tunnels
 Access Point Statistics
Access points use L2TP V3 to create tunnels for transporting layer 2 frames. L2TP V3 enables an access point to create tunnels
for transporting Ethernet frames to and from bridge VLANs and physical ports. L2TP V3 tunnels can be defined between WING
devices and other devices supporting the L2TP V3 protocol.
To review a selected access point’s L2TPv3 statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
connected access points.
3. Select L2TPv3.
Figure 13-58 Access Point - L2TPv3 screen
OSPF ignore
state monitor
timeout
Displays the timeout that, when exceeded, prohibits the access point from detecting changes to
the OSPF link state.
OSPF max ignore
state count
Displays whether an OSPF state timeout is being ignored and not utilized in the transmission of
state update requests amongst neighbors within the OSPF topology.
OSPF max routes States the maximum number of routes negotiated amongst neighbors within the OSPF topology.
OSPF routes
received
Lists the routes received and negotiated amongst neighbors within the OSPF topology.