Statistics 13 - 21
13.2.5 Wireless Clients
RF Domain Statistics
The Wireless Clients screen displays device information for wireless clients connected to RF Domain member access points.
Review this content to determine whether a client should be removed from access point association within the selected RF
Domain.
To review a RF Domain’s connected wireless clients:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select Wireless Clients from the RF Domain menu.
Figure 13-12 RF Domain - Wireless Clients screen
The Wireless Clients screen displays the following:
RSSI Displays the Received Signal Strength Indicator (RSSI) of the detected access point. Use
this variable to help determine whether a device connection would improve network
coverage or add noise.
Reported by Displays the MAC address of the RF Domain member reporting the access point.
Clear All Select Clear All to reset the statistics counters to zero and begin a new data collection.
Refresh Select the Refresh button to update the statistics counters to their latest values.
MAC Address Displays the hostname (MAC address) of each listed wireless client. This address is hard-
coded at the factory and can not be modified. The hostname address displays as a link that
can be selected to display configuration and network address information in greater detail.
IP Address Displays the current IP address the wireless client is using for a network identifier.
To Next Page
Loading...
