Motorola WiNG 5.5 - Creating Administrators and Roles

10 - 2 WiNG 5.5 Access Point System Reference Guide
10.1 Creating Administrators and Roles
 Management Access
Use the Administrators screen to review existing administrators, their access medium and their administrative role within
the access point managed network. New administrators can be added and existing administrative configurations modified or
deleted as required.
To create administrators and assign them access types and roles:
1. Select Configuration from the Web UI
2. Select Administrators.
The Administrators screen displays by default.
Figure 10-1 Management Policy - Administrators screen
3. Refer to the following to review existing administrators:
4. Select Add to create a new administrator configuration, Edit to modify an existing configuration or Delete to permanently
remove an administrator.
User Name Displays the name assigned to the administrator upon creation. The name cannot be
modified when editing an administrator’s configuration.
Access Type Lists the Web UI, Telnet, SSH or Console access assigned to each administrator. A
single administrator can have any or all roles assigned.
Role Lists the Superuser, System, Network, Security, Monitor, Help Desk or Web User role
assigned to each listed administrator. An administrator can only be assigned one role
at a time.