Statistics 13 - 149
4. Periodically select Refresh to update the screen to its latest values.
13.4.5 Association History
Wireless Client Statistics
Refer to the Association History screen to review this client’s access point connections. Hardware device identification,
operating channel and GHz band data is listed for each access point. Association History can help determine whether the client
has connected to its target access point and maintained its connection, or has roamed and been supported by unplanned access
points in the controller or service platform managed network.
To view a selected client’s association history:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF Domain, an access point, then
a connected client.
3. Select Association History.
Figure 13-99 Wireless Client - Association History screen
Refer to the following to discern this client’s access point association history:
Direction Type Displays whether the WMM TPSEC data stream is in the uplink or downlink direction.
Request Time Lists each sequence number’s request time for WMM TPSEC traffic in the specified direction.
This is time allotted for a request before packets are actually sent.
Used Time Displays the time the client used TSPEC. The client sends a delete traffic stream (DELTS)
message when it has finished communicating.
TID Displays the parameter for defining the traffic stream. TID identifies data packets as belonging
to a unique traffic stream.
Access Point Lists the access point MAC address this client has connected to, and is being managed by.
BSSID Displays the BSSID of each previously connected access point.
To Next Page
Loading...
