Statistics 13 - 19
8. Refer to the WLANs table to review RF Domain WLAN, radio and client utilization. Use this information to help determine
whether the WLANs within this RF Domain have an optimal radio and client utilization.
9. The Clients by Band bar graph displays the total number of RF Domain member clients by their IEEE 802.11 radio type.
10.The Clients by Channel pie charts displays the channels used by RF Domain member clients using 5GHz and 2.4GHz
radios.
11.Periodically select Refresh to update the contents of the screen to their latest values.
13.2.3 Devices
RF Domain Statistics
The Devices screen displays RF Domain member hardware data, connected client counts, radio data and network IP address.
To display RF Domain member device statistics:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select Devices from the RF Domain menu.
Figure 13-10 RF Domain - Devices screen
Device Displays the system assigned name of each device that’s a member of the RF Domain. The
name displays as a link that can be selected to display configuration and network address
information in greater detail.
AP MAC Address Displays each device’s factory encoded MAC address as its hardware identifier.
Type Displays each device model within the selected RF Domain.
Client Count Displays the number of clients connected with each listed device. AP6532, AP6522,
AP6562, AP71xx, AP8132 and AP8232 models can support up to 256 clients per access
point. AP6511 and AP6521 models can support up to 128 clients per access point.
To Next Page
Loading...
