Statistics 13 - 7
13.1.4 Pending Adoptions
System Statistics
The Pending Devices screen displays those devices detected within the network coverage area, but have yet to be adopted.
Review these devices to assess whether they could provide radio coverage to wireless clients needing support.
To view pending AP adoptions to the controller or service platform:
1. Select the Statistics menu from the Web UI.
2. Select the System node from the left navigation pane.
3. Select Pending Adoptions from the left-hand side of the UI.
Figure 13-4 System - Pending Adoptions screen
The Pending Adoptions screen displays the following:
MAC Address Displays the MAC address of the device pending adoption. Select the MAC address to view
device configuration and network address information in greater detail.
Type Displays the AP type.
IP Address Displays the current IP Address of the device pending adoption.
VLAN Displays the VLAN the device pending adoption will use as a virtual interface with its adopting
controller or service platform.
Reason Displays a status (reason) as to why the device is pending adoption.
Discovery Option Displays the discovery option code for each AP listed pending adoption.
Last Seen Displays the date and time stamp of the last time the device was seen. Click the arrow next
to the date and time to toggle between standard time and UTC.
To Next Page
Loading...
