13 - 6 WiNG 5.5 Access Point System Reference Guide
To view adopted AP statistics:
1. Select the Statistics menu from the Web UI.
2. Select the System node from the left navigation pane.
3. Select Adopted Devices from the left-hand side of the UI.
Figure 13-3 System - Adopted Devices screen
The Adopted Devices screen provides the following:
Adopted Device Displays administrator assigned hostname of the adopted device. Select the adopted device
to display configuration and network address information in greater detail.
Type Displays the adopted access point’s model type.
RF Domain Name Displays the domain the adopted AP has been assigned to. Select the RF Domain to display
configuration and network address information in greater detail.
Model Number Lists the model number of each AP that’s been adopted since this screen was last refreshed.
Config Status Displays the configuration file version in use by each listed adopted device. Use this
information to determine whether an upgrade would increase the functionality of the
adopted device.
Config Errors Lists any errors encountered when the listed device was adopted.
Adopter Hostname Lists the administrator hostname assigned to the adopting controller or service platform.
Adoption Time Displays a timestamp for each listed device that reflects when the device was adopted by
the controller or service platform.
Startup Time Provides a date stamp when the adopted device was restarted post adoption.
Refresh Select Refresh to update the statistics counters to their latest values.
To Next Page
Loading...
