Services Configuration 9 - 23
24. Refer to the DHCP Option Values table to set global DHCP options applicable to all clients, whereas a set of subnet
options applies to just the clients on a specified subnet.
Select the + Add Row button to add individual options. Assign each a Global DHCP Option Name to help differentiate
it from others with similar configurations. At any time you can select the radio button of an existing option and select the
Delete icon to remove it from the list of those available.
Assign a Value to each option with codes in the range 1 through 254. A vendor-specific option definition only applies to
the vendor class for which it’s defined.
25. Refer to the Static Routes Installed on Clients table to set fixed routes for client destination and gateways.
26. Select the + Add Row button to add individual options for Destination and Gateway addresses.
27. Select OK to save the updates to the DHCP pool’s Advanced settings. Select Reset to revert the screen back to its last
saved configuration.
9.3.2 Defining DHCP Server Global Settings
Setting the DHCP Server Configuration
Setting a DHCP server global configuration entails defining whether BOOTP requests are ignored and setting DHCP global
server options.
To define DHCP server global settings:
1. Select the Global Settings tab and ensure the Activate DHCP Server Policy button remains selected. This option must
remain selected to implement the configuration as part of the access point profile.
NetBIOS Servers Specify a numerical IP address of a single or group of NetBIOS WINS servers available to
DHCP supported wireless clients. Select Alias to use a network alias with the NetBIOS
server configuration. For more information see Alias on page 7-34.
To Next Page
Loading...
