9 - 24 WiNG 5.5 Access Point System Reference Guide
Figure 9-13 DHCP Server Policy screen - Global Settings tab
2. Set the following parameters within the Configuration field:
3. Refer to the Global DHCP Server Options field.
Use the + Add Row button at the bottom of the field to add a new global DHCP server option. At any time you can select
the radio button of an existing global DHCP server option and select the Delete icon to remove it from the list of those
available.
Use the Type drop-down menu to specify whether the DHCP option is being defined as a numerical IP address or ASCII
string or Hex string. Highlight an entry from within the Global Options screen and click the Remove button to delete the
name and value.
4. Select OK to save the updates to the DHCP server global settings. Select Reset to revert to the last saved configuration.
Ignore BOOTP Requests Select the check box to ignore BOOTP requests. BOOTP requests boot remote systems
within the network. BOOTP messages are encapsulated inside UDP messages and are
forwarded. This feature is disabled by default, so unless selected, BOOTP requests are
forwarded.
Ping Timeout Set an interval (from 1 -10 seconds) for the DHCP server ping timeout. The timeout is used
to intermittently ping and discover whether a client requested IP address is already used.
To Next Page
Loading...
