Device Configuration 5 - 179
Figure 5-112 Device Overrides - Certificates screen
6. Set the following Management Security certificate configurations:
7. Set the RADIUS Security certificate configuration. Select the Stored radio button to enable a drop-down menu where an
existing certificate/trustpoint can be leveraged. To leverage an existing device certificate for use with this target device,
select the Launch Manager button.
8. Select OK to save the changes made to the certificate configurations. Selecting Reset reverts the screen to its last saved
configuration.
HTTPS Trustpoint Either use the default-trustpoint or select the Stored radio button to enable a drop-down
menu where an existing certificate/trustpoint can be leveraged. To leverage an existing
device certificate for use with this target device, select the Launch Manager button. For
more information, see Manage Certificates on page 5-180.
SSH RSA Key Either use the default_rsa_key or select the Stored radio button to enable a drop-down
menu where an existing certificate can be leveraged. To leverage an existing key, select
the Launch Manager button. For more information, see RSA Key Management on page 5-
184.
NOTE: Pending trustpoints and RSA keys are typically not verified as existing on a
device.
To Next Page
Loading...
