5 - 190 WiNG 5.5 Access Point System Reference Guide
Figure 5-120 Certificate Management - Create Certificate screen
3. Set the following Create New Self-Signed Certificate configuration parameters:
4. Set the following Certificate Subject Name parameters required for the creation of the certificate:
Certificate Name Enter the 32 character maximum name assigned to identify the name of the trustpoint
associated with the certificate. A trustpoint represents a CA/identity pair containing the
identity of the CA, CA-specific configuration parameters, and an association with an
enrolled identity certificate.
Use Existing Select this option to use an existing RSA key. Use the drop-down menu to select the
existing key used by both the device and the server (or repository) of the target RSA key.
Create New Select this option to create a new RSA key. Provide a 32 character name to identify the
RSA key. Use the spinner control to set the size of the key (from 1,024 - 2,048 bits).
Motorola Solutions recommends leaving this value at the default setting (1024) to ensure
optimum functionality. For more information on creating a new RSA key, see RSA Key
Management on page 5-184.
Certificate Subject Name Select either the auto-generate radio button to automatically create the certificate's
subject credentials or select user-configured to manually enter the credentials of the self
signed certificate. The default setting is auto-generate.
Country (C) Define the Country of deployment for the certificate. The field can be modified by the user.
This is a required field and must not exceed 2 characters.
To Next Page
Loading...
