5 - 192 WiNG 5.5 Access Point System Reference Guide
Figure 5-121 Certificate Management - Create CSR screen
3. Set the following Create New Certificate Signing Request (CSR) configuration parameters:
4. Set the following Certificate Subject Name parameters required for the creation of the certificate:
Create New Select this option to create a new RSA Key. Provide a 32 character name to identify the
RSA key. Use the spinner control to set the size of the key (from 1,024 - 2,048 bits).
Motorola Solutions recommends leaving this value at the default setting (1024) to ensure
optimum functionality. For more information on creating a new RSA key, see RSA Key
Management on page 5-184.
Use Existing Select this option to use an existing RSA key. Use the drop-down menu to select the
existing key used by both the device and the server (or repository) of the target RSA key.
Certificate Subject Name Select either the auto-generate radio button to automatically create the certificate's
subject credentials or select user-defined to manually enter the credentials of the self
signed certificate. The default setting is auto-generate.
Country (C) Define the Country used in the CSR. The field can be modified by the user. This is a
required field and must not exceed 2 characters.
State (ST) Enter a State for the state or province name used in the CSR. This is a required field.
City (L) Enter a City to represent the city name used in the CSR. This is a required field.
Organization (O) Define an Organization for the organization used in the CSR. This is a required field.
To Next Page
Loading...
