Motorola WiNG 5.5

5 - 222 WiNG 5.5 Access Point System Reference Guide
22. Select + Add Row needed to include additional indexes.
23. Select OK to save the changes made to the Ethernet Port Spanning Tree configuration. Select Reset to revert to the last
saved configuration.
5.4.5.3.4 Radio Override Configuration
 Profile Interface Override Configuration
Access points can have their radio profile configurations overridden if a portion of a profile is no longer relevant to the access
point’s deployment objective.
To define a radio configuration override for an access point:
1. Select the Configuration tab from the Web UI.
2. Select Devices from the Configuration tab.
3. Select Device Overrides.
4. Select a target access point from the device browser in the lower, left-hand, side of the UI.
5. Select Interface to expand its sub menu options.
6. Select Radios.
Figure 5-139 Device Overrides - Access Point Radios screen
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen’s
Device Overrides field and select Clear Overrides. This will remove all overrides
from the device.