Device Configuration 5 - 253
Figure 5-156 Device Overrides - Network - Spanning Tree screen
6. Set the following MSTP Configuration parameters:
MSTP Enable Select this option to enable MSTP for this profile. MSTP is disabled by default, so if
requiring different (groups) of VLANs with the profile supported network segment.
Max Hop Count Define the maximum number of hops the BPDU will consider valid in the spanning tree
topology. The available range is from 7 - 127. The default setting is 20.
MST Config Name Define a 64 character maximum name for the MST region as an identifier.
MST Revision Level Set a numeric revision value ID for MST configuration information. Set a value from
0 - 255. The default setting is 0.
Cisco MSTP
Interoperability
Select either the Enable or Disable radio buttons to enable/disable interoperability with
Cisco’s version of MSTP, which is incompatible with standard MSTP. This setting is
disabled by default.
Hello Time Set a BPDU hello interval from 1 - 10 seconds. BPDUs are exchanged regularly (every 2
seconds by default) and enable supported devices to keep track of network changes and
star/stop port forwarding as required.
To Next Page
Loading...
