5 - 270 WiNG 5.5 Access Point System Reference Guide
15. Click the IGMP Snooping tab to set or override the IGMP snooping configuration.
Figure 5-168 Device Overrides - Network Bridge VLAN - IGMP Snooping screen
16. Set the following parameters to configure IGMP Snooping values:
17. Set the following parameters for Multicast Router configuration:
Edge VLAN Mode Select this option to enable edge VLAN mode. When selected, the IP address in the
VLAN is not used for normal operations, as its now designated to isolate devices and
prevent connectivity. This feature is enabled by default.
Enable IGMP Snooping Select this option to enable IGMP snooping. If disabled, snooping on this bridge VLAN is
disabled. This feature is enabled by default. If disabled, the settings under bridge
configuration are overridden.
Forward Unknown
Multicast Packets
Select this option to enable the access point to forward multicast packets from
unregistered multicast groups. If disabled, the Unknown Multicast Forward feature is
also disabled for the selected VLANs. This settings is enabledby default.
Interface Name Select the interface used for IGMP snooping over a multicast router. Multiple interfaces
can be selected.
Multicast Router Learn
Mode
Set the learning mode to either pim-dvmrp or static.
To Next Page
Loading...
