6 - 4 WiNG 5.5 Access Point System Reference Guide
Use the sequential set of WLAN screens to define a unique configuration for each WLAN. Refer to the following to set WLAN
configurations:
• Basic WLAN Configuration
• Configuring WLAN Security
• Configuring WLAN Firewall Support
• Configuring Client Settings
• Configuring WLAN Accounting Settings
• Configuring Service Monitoring Settings
• Configuring Client Load Balancing
• Configuring Advanced WLAN Settings
• Configuring Auto Shutdown Settings
DHCP Option 82 Displays if DHCP Option 82 is enabled or not. DHCP option 82 provides additional
information on the physical attachment of a client
Authentication Type Displays the name of the authentication scheme used by each listed WLAN to secure
client transmissions. None is listed if authentication is not used within a WLAN. In case
of no authentication, refer to the Encryption Type column to verify if there is some sort of
data protection used with the WLAN, or risk using this WLAN with no protection at all.
Encryption Type Displays the name of the encryption scheme used by each listed WLAN to secure client
membership transmissions. None is listed if encryption is not used within this WLAN. In
case of no encryption, refer to the Authentication Type column to verify if there is some
sort of data protection used with the WLAN or risk using this WLAN with no protection
at all.
QoS Policy Lists the QoS policy applied to each listed WLAN. A QoS policy needs to be custom
selected (or created) for each WLAN in respect to the WLAN’s intended client traffic, and
the voice, video or normal data traffic it supports.
Association ACL Lists the Association ACL policy applied to each listed WLAN. An Association ACL is a
policy-based Access Control List (ACL) that either prevents or allows wireless clients from
connecting to a access point managed WLAN. The mapping of an Association ACL is
strictly optional.
To Next Page
Loading...
