Wireless Configuration 6 - 21
Figure 6-7 WLAN Security - WEP 64 screen
7. Configure the following WEP 64 settings:
Default WEP 64 keys are as follows:
• Key 1 1011121314
• Key 2 2021222324
• Key 3 3031323334
• Key 4 4041424344
8. Select OK when completed to update the WLAN’s WEP 64 encryption configuration. Select Reset to revert the screen back
to its last saved configuration.
Generate Keys Specify a 4 to 32 character pass key and select the Generate button. The pass key can be
any alphanumeric string. The wireless controller, other proprietary routers, and Motorola
Solutions clients use the algorithm to convert an ASCII string to the same hexadecimal
number. Clients without Motorola Solutions adapters need to use WEP keys manually
configured as hexadecimal numbers.
Keys 1-4 Use the Key #1-4 fields to specify key numbers. For WEP 64 (40-bit key), the keys are 10
hexadecimal characters in length. Select one of these keys for default activation by
selecting its radio button. Select Show to display the actual characters comprising the key.
Restore Default WEP
Keys
Select this radio button to restore the WEP algorithm back to its default settings.
To Next Page
Loading...
