Wireless Configuration 6 - 35
Figure 6-15 WLAN Accounting screen
6. Set the following Syslog Accounting information:
7. Select Enable RADIUS Accounting to use an external RADIUS resource for AAA accounting. When the radio button is
selected, a AAA Policy field displays. Either use the default AAA policy with the WLAN, or select Create to define a new
AAA configuration that can be applied to the WLAN. This setting is disabled by default.
8. Select OK when completed to update this WLAN’s accounting settings. Select Reset to revert the screen back to its last
saved configuration.
Enable System Log
Accounting
Select this option for the access point to generate accounting records in standard syslog
format (RFC 3164). The feature is disabled by default.
Syslog Host Specify the IP address (or hostname) of the external syslog host where accounting records
are routed.
Syslog Port Use the spinner control to set the destination UDP port of the external syslog host where
accounting records are routed. The default port is 514.
Proxy Mode Use the drop-down menu to define how syslog accounting is conducted. Options include
None, Through Wireless Controller and Through RF Domain Manager.
Format Select the format used to include (pack) the MAC address in a syslog request. Options
include No Delimiter (aabbccddeeff), Colon Delimiter (aa:bb:cc:dd:ee:ff), Dash Delimiter
(aa-bb-cc-dd-ee-ff), Dot Delimiter per four (aabb.ccdd.eef) and Middle Dash Delimiter
(aabbcc-ddeeff). The default setting is Dash Delimiter (aa-bb-cc-dd-ee-ff).
Case Use the drop-down menu to specify whether the MAC address format supplied is
specified in upper or lower case. The default setting is upper case.
To Next Page
Loading...
