Wireless Configuration 6 - 39
7. Set the following Load Balancing Settings (2.4 GHz):
8. Set the following Load Balancing Settings (5 GHz):
9. Select OK when completed to update this WLAN’s client load balance settings. Select Reset to revert the screen back to
its last saved configuration.
Single Band Clients Select this option to enable single band client associations on the 2.4 GHz frequency, even
if load balancing is available. The default setting is enabled.
Max Probe Requests Enter a value (from 0 - 10,000) for the maximum number of probe requests for client
associations on the 2.4 GHz frequency. The default value is 60.
Probe Request Interval Enter a value in seconds (from 0 - 10,000) to set an interval for client probe requests,
beyond which association is allowed for clients on the 2.4 GHz frequency. The default
setting is 10 seconds.
Single Band Clients Select this option to enable single band client associations on the 5.0 GHz frequency, even
if load balancing is available. The default setting is enabled.
Max Probe Requests Enter a value (from 0 - 10,000) for the maximum number of probe requests for client
associations on the 5.0 GHz frequency. The default value is 60.
Probe Request Interval Enter a value in seconds (from 0 - 10,000) to set an interval for client probe requests,
beyond which association is allowed for clients on the 5.0 GHz frequency. The default
setting is 10 seconds.
To Next Page
Loading...
