6 - 44 WiNG 5.5 Access Point System Reference Guide
10. Select the Fast BSS Transition option to enable 802.11r fast BSS transition support.
Fast BSS (802.11r) is an attempt to undo the burden that security and QoS added to the handoff process, and restore it back
to an original four message exchange process. The central application for the 802.11r standard is VOIP using mobile phones
within wireless Internet networks.
11. Select Enable to enable HTTP analysis.
12. Set the following HTTP Analysis Forward to Syslog Server configuration:
13. Set the following Filter configuration for filtering specific contents from the information sent to a remote syslog server for
HTTP analysis:
14. Select OK when completed to update this WLAN’s Advanced settings. Select Reset to revert to the last saved
configuration.
6 58.5 65 121.5 135 263.3 292.5
7 65 72.2 135 150 292.5 325
8 78 86.7 162 180 351 390
9 n/a n/a 180 200 390 433.3
Enable Select this option to forward logging messages to an external syslog server.
Host Use the field to provide a hostname/IP address of the remote syslog server. Use the drop-
down menu to select the type of host address.
Port Use the spinner control to configure the port on which the external syslog server can be
reached.
Proxy Mode Use the drop-down menu to select the proxy configuration.
Filter Out Images Select this option to filter images from the information logged to the remote syslog server.
Filter Post Select this option to filter HTTP POST information from the information logged to the
remote syslog server.
Strip Query String Select this option to strip the query string in the information logged to the remote syslog
server.
Table 6.4 MCS-802.11ac (theoretical throughput for single spatial streams)
MCS Index
20 MHz
No SGI
20 MHz
With SGI
40 MHz
No SGI
40MHz
With SGI
80 MHz
No SGI
80MHz
With SGI
To Next Page
Loading...
