6 - 46 WiNG 5.5 Access Point System Reference Guide
Figure 6-21 WLAN - Auto Shutdown screen
6. Refer to the following to configure Auto Shutdown parameters:
7. Select the + Add Row button to add time based access configuration for the WLAN.
8. Refer to the following to configure Time Based Access parameters:
Shutdown on Mesh Point
Loss
Select to enable the WLAN to shutdown if the access point’s connection to the mesh
network is lost. This setting is disabled by default.
Shutdown on Primary
Port Link Loss
Select to enable the WLAN to shutdown if the access point’s connection on its primary
wired port is lost. This setting is disabled by default.
Shutdown on Critical
Resource Down
Select to enable the WLAN to shutdown if any one or all of the access point’s configured
critical resources are not reachable or available. This setting is disabled by default.
Shutdown on
Unadoption
Select to enable the WLAN to shutdown if the access point is unadopted from its wireless
controller. This setting is disabled by default.
Days Configure the days on which the WLAN is accessible. Select from one of the following:
• All – Select this option to make the WLAN available on all days of the week.
• Weekends – Select this option to make the WLAN available only during weekends
(Saturday and Sunday).
• Weekdays – Select this option to make the WLAN available only during weekdays
(from Monday to Friday).
• Sunday/Monday/Tuesday/Wednesday/Thursday/Friday/Saturday – Select a week day
to make the WLAN available only during that specific day.
Start Time Configure the time when the WLAN is available. Start time is configured as HH:MM AM/
PM.
To Next Page
Loading...
