6 - 70 WiNG 5.5 Access Point System Reference Guide
Figure 6-29 Radio QoS Policy screen - Multimedia Optimizations tab
19. Set the following Accelerated Multicast settings:
20. Set the following Smart Aggregation settings.
Smart Aggregation enhances the existing implementation of frame aggregation by dynamically selecting the time when the
aggregated frame is transmitted. In the normal implementation of frame aggregation, an aggregated frame is sent when it
meets one of these conditions:
• When a preconfigured number of frames to aggregate is reached.
• When a preconfigured interval of time has elapsed since the first frame - of a set of frames to be aggregated - was
received.
Maximum number of
wireless clients allowed
Specify the maximum number of wireless clients (from 0 - 256) allowed to use accelerated
multicast. The default value is 25.
When wireless client
count exceeds the above
limit
When the wireless client count using accelerated multicast exceeds the maximum
number set the radio to either Reject new wireless clients or to Revert existing clients to
a non-accelerated state. The default setting is Reject.
Maximum multicast
streams per client
Specify the maximum number of multicast streams (from 1 - 4) wireless clients can use.
The default value is 2.
Packets per second for
multicast flow for it to be
accelerated
Specify the threshold of multicast packets per second (from 1 - 500) that triggers
acceleration for wireless clients. The default value is 25.
Timeout for wireless
clients
Specify a timeout value in seconds (from 5 - 6,000) for wireless clients to revert back to a
non-accelerated state. The default value is 60.
To Next Page
Loading...
