Wireless Configuration 6 - 101
5. Select the Add button to define a new Passpoint policy, or select an existing Passpoint policy and select Edit to modify its
existing configuration. Existing Passpoint policies can be selected and deleted as needed.
Figure 6-47 Passpoint Policy - Add new policy
6. Configure the following parameters in respect to the Basic Configuration fields:
7. Configure the following parameters with respect to the Operator Network Parameters fields.
8. Select OK when completed to update the Passpoint policy settings. Select Reset to revert to the last saved configuration.
Access Network Type Select the network type from the drop-down. This is the type of network that is advertised to
requesting clients.
Operator Name Enter a friendly name for the operator running the hotspot service. Enter a string not longer than
64 characters.
Venue Name Enter a friendly name for the venue in which this hotspot service is running. Enter a string not
longer than 252 characters.
Venue Name Lang Use this table to provide encoding information to display the Venue Name in other languages.
Use this table to provide the language Code and the hexadecimal representation of the venue
name in the Name field. Multiple values can be entered in this table.
Operator Name Lang Use this table to provide encoding information to display the Operator Name in other
languages. Use this table to provide the language Code and the hexadecimal representation of
the operator name in the Name field. Multiple values can be entered in this table.
PLMNID Use the PLMNID table to provide the Mobile Country Code (MCC) and the Mobile Network
Code (MNC) for the operator along with a brief description of this information.
To Next Page
Loading...
