Network configuration 7 - 21
16. Select OK to save the updates. Select Reset to revert to last saved configuration.
Attributes Lists whether the format specified applies only to the user name/password in mac-auth
or for all attributes that include a MAC address, such as calling-station-id or called-
station-id.
Server Pooling Mode Controls how requests are transmitted across RADIUS servers. Failover implies traversing
the list of servers if any server is unresponsive. Load Balanced uses all servers in a round-
robin fashion. The default setting is Failover.
Client Attempts Defines the number of times (1 - 10) an EAP request is transmitted to a wireless client
before giving up. The default setting is 3.
Request Timeout Defines the time after which an EAP Request to a wireless client is retried.
ID Request Timeout Defines the time (1 - 60 seconds) after which an EAP ID Request to a wireless client is
retried. The default setting is 30 seconds.
Retransmission Scale
Factor
Configures the scaling of the retransmission attempts. Timeout at each attempt is a
function of the request timeout factor and client attempts number. 100 (default setting)
implies a constant timeout at each retry; smaller values indicate more aggressive (shorter)
timeouts, larger numbers indicate more conservative (longer) timeouts on each successive
attempt.
Cisco VSA Audit Session
Id
Configures a vendor specific attribute (VSA) for CISCO to allow CISCO’s Identity Services
Engine (ISE) to validate the compliance of a client to the network’s policies such as the
validity of the virus definition files for the antivirus software or the definition files for a
anti-spy ware software.
To Next Page
Loading...
