8 - 24 WiNG 5.5 Access Point System Reference Guide
Figure 8-14 Security - Device Fingerprinting - Client Identity Group - New Client Identity Group
15. From the drop-down, select the Client Identity Policy to include in this group. Use the buttons next to the drop-down to
manage and create new Client Identity policies.
16. Use the Precedence control to set the precedence for the Client Identity. This index sets the sequence the client identity
in this Client Identity Group is checked or matched.
17. Click Ok to save changes. Click Reset to revert all changes made to this screen.
Click Exit to close the Client Identity Group screen.
To Next Page
Loading...
