8 - 38 WiNG 5.5 Access Point System Reference Guide
Figure 8-24 Device Categorization screen - Marked Devices
5. If creating a new Device Categorization filter, provide it a Name (up to 32 characters). Select OK to save the name and
enable the remaining device categorization parameters.
6. Select + Add Row to populate the Marked Devices field with parameters for classifying an access point or client and
defining the target device’s MAC address and SSID. Select the red (-) Delete Row icon as needed to remove an individual
table entry.
7. Define the following parameters to add a device to a list of devices sanctioned for network operation:
Select OK to save the updates to the Marked Devices List. Select Reset to revert to the last saved configuration.
Classification Use the drop-down menu to designate the target device as either Sanctioned or
Neighboring.
Device Type Use the drop-down menu to designate the target device as either an access point or client.
MAC Address Enter the factory coded MAC address of the target device. This address is hard coded by
the device manufacturer and cannot be modified. This MAC address is defined as
authorized or unauthorized as part of the device categorization process.
SSID Enter the SSID of the target device requiring categorization. The SSID cannot exceed 32
characters.
To Next Page
Loading...
