9 - 26 WiNG 5.5 Access Point System Reference Guide
Figure 9-15 DHCP Class - Name Add screen
3. If adding a new DHCP Class Name, assign a name representative of the device class supported. The DHCP user class
name should not exceed 32 characters.
4. Select a row within the Value column to enter a 32 character maximum value string.
5. Select the Multiple User Class radio button to enable multiple option values for the user class. This allows the user class
to transmit multiple option values to DHCP servers supporting multiple user class options.
6. Select OK to save the updates to this DHCP class policy. Select Reset to revert to the last saved configuration.
To Next Page
Loading...
