Services Configuration 9 - 31
6. Set the Schedule to configure access times and dates. Select Restrict Access By Time control to enable time based
access.
7. Select Restrict Access By Day Of Week control to enable access based on the day of the week.
VLAN Select this option (and use the slider) to assign a specific VLAN to this RADIUS user group.
Ensure Dynamic VLAN assignment (Single VLAN) is enabled for the WLAN for the VLAN
to work properly. For more information, see Basic WLAN Configuration on page 6-5.
WLAN SSID Assign a list of SSIDs (users) the RADIUS group are allowed to associate to. An SSID
cannot exceed 32 characters. Assign WLAN SSIDs representative of users a guest user
will need to access. The parameter is not available if this RADIUS group has been defined
as a management group.
Rate Limit from Air Select the check box to set an uplink rate limit for managed clients within this RADIUS
group. Use the spinner to set value from 100 - 1,000,000 kbps. Setting a value of 0
disables rate limiting.
Rate Limit to Air Select the check box to set a downlink rate limit from clients within this RADIUS group.
Use the spinner to set value from 100 - 1,000,000 kbps. Setting a value of 0 disables rate
limiting.
Management Group Select this option to designate the RADIUS group as a management group. If set as
management group, assign a role to the members of the group using the Access drop-
down menu, allowing varying levels of administrative rights. This feature is disabled by
default.
Access If a group is listed as a management group, assign how the devices can be accessed.
Available access types are:
• Web - Web access through browser is permitted
• SSH - SSH access through command line is permitted
• Telnet - Telnet access through command line is permitted
• Console - Console access to the device is permitted
Role If a group is listed as a management group, assign a unique role. Available roles include:
• monitor - Read-only access
• helpdesk - Helpdesk/support access
• network-admin - Wired and wireless access
• security-admin - Grants full read/write access
• system-admin - System administrator access
Time Start Use the spinner control to set the time (in HH:MM format) RADIUS group members are
allowed to login and access RADIUS server resources (for example, 14:45 = 2:45). Select
either the AM or PM radio button to set the time as morning or evening.
Time Stop Use the spinner control to set the time (in HH:MM format) RADIUS group members are
denied access to RADIUS server resources (for example, 15:45 = 3:45). Select either the
AM or PM radio button to set the time as morning or evening. If already logged in, the
RADIUS group user is deauthenticated from the WLAN.
Days Select the day(s) of the week RADIUS group members can access RADIUS resources.
To Next Page
Loading...
