Operations 12 - 15
Figure 12-21 Device Details screen
4. Refer to the following to determine whether a firmware image needs requires an update:
5. Select Firmware Upgrade to upgrade the device’s firmware to display the Firmware Upgrade screen. For more
information, see Upgrading Device Firmware on page 12-12.
6. Select Reload to restart the device.
Firmware Version Displays the Primary and Secondary firmware image version currently utilized by the
selected access point.
Build Date Displays the date the Primary and Secondary firmware image was built for the
selected device.
Install Date Displays the date the firmware was installed on the access point.
Fallback Lists whether fallback is currently enabled for the selected device. When enabled,
the device reverts back to the last successfully installed firmware image if something
were to happen in its next firmware upgrade that would render the device
inoperable.
Current Boot Lists whether the primary or secondary firmware image is to be applied the next time
the device boots.
Upgrade Status Displays the status of the last firmware upgrade. For information on upgrading device
firmware, see Upgrading Device Firmware on page 12-12.
To Next Page
Loading...
