12 - 36 WiNG 5.5 Access Point System Reference Guide
Figure 12-38 Re-elect Controller screen
4. Refer to the Available APs column, and use the > button to move the selected access point into the list of Selected APs
available for RF Domain Manager candidacy. Use the >> button to move all listed access points into the Selected APs table.
The re-election process can be achieved through the selection of an individual access point, or through the selection of
several access points with a specific Tunnel Controller Name matching the selected access points.
5. Select Re-elect to designate the Selected AP(s) as resources capable of tunnel establishment.
To Next Page
Loading...
