12 - 50 WiNG 5.5 Access Point System Reference Guide
Figure 12-47 Certificate Management - Create CSR screen
4. Define the following configuration parameters required to Create New Certificate Signing Request (CSR):
5. Set the following Certificate Subject Name parameters required for the creation of the certificate:
RSA Key: Use Existing Select the radio button and use the drop-down menu to select the existing key used by
both the access point and the server (or repository) of the target RSA key.
RSA Key: Create New Create or use an existing key by selecting the appropriate radio button. Use the spinner
control to set the size of the key (between 1,024 - 2,048 bits). Motorola Solutions
recommends leaving this value at the default setting of 1024 to ensure optimum
functionality. For more information, see RSA Key Management on page 12-42.
Certificate Subject Name Select either the auto-generate radio button to automatically create the certificate's
subject credentials or select user-defined to manually enter the credentials of the self
signed certificate. The default setting is auto-generate.
Country (C) Define the Country used in the CSR. The field can be modified by the user to other values.
This is a required field and must not exceed 2 characters.
State (ST) Enter a State/Prov. for the state or province name used in the CSR. This is a required field.
City (L) Enter a City to represent the city name used in the CSR. This is a required field.
Organization (O) Define an Organization for the organization used in the CSR. This is a required field.
To Next Page
Loading...
