Motortech MIC5 User Manual

8 Settings via the MICT
126 Rev. 03/2019
Status message Description
PUnumber: Faulty Signal. Signal
period (x, events counted y) is too
small compared to previous signal
period (z).
The pickup (PUnumber) is supplying a faulty signal.
Signal period (x, events counted y) is too small compared
to previous signal period (z). Check the pickups and the
corresponding configuration (see Engine – Pickups on
page 96). Furthermore, also pay attention to the
instructions in the section entitled Pickup Input Errors on
page 164.
PUnumber: Index mark missing. Index mark missing for pickup (PUnumber). Check the
pickups and the corresponding configuration (see Engine
– Pickups on page 96). Furthermore, also pay attention to
the instructions in the section entitled Pickup Input Errors
on page 164.
PUnumber: Missing index. Index missing for pickup (PUnumber). Check the pickups
and the corresponding configuration (see Engine –
Pickups on page 96). Furthermore, also pay attention to
the instructions in the section entitled Pickup Input Errors
on page 164.
PUnumber: Missing Signal. Signal
period (x, events counted y) is too
great compared to previous signal
period (z).
Signal missing for pickup (PUnumber). Signal period (x,
events counted y) is too large compared to previous
signal period (z). Check the pickups and the
corresponding configuration (see Engine – Pickups on
page 96). Furthermore, also pay attention to the
instructions in the section entitled Pickup Input Errors on
page 164.
PUnumber: Missing Signal. Signal
timeout occurred (events counted
x).
Signal missing for pickup (PUnumber). Timeout occurred
(events counted until timeout x). Check the pickups and
the corresponding configuration (see Engine – Pickups on
page 96). Furthermore, also pay attention to the
instructions in the section entitled Pickup Input Errors on
page 164.
PUnumber: No index mark found. Could not find index mark for pickup (PUnumber). Check
the pickups and the corresponding configuration (see
Engine – Pickups on page 96). Furthermore, also pay
attention to the instructions in the section entitled Pickup
Input Errors on page 164.
PUnumber: No signal. The pickup (PUnumber) is not supplying a signal. Check
the pickups and the corresponding configuration (see
Engine – Pickups on page 96). Furthermore, also pay
attention to the instructions in the section entitled Pickup
Input Errors on page 164.

Motortech MIC5 Specifications

General

Brand	Motortech
Model	MIC5
Category	Controller
Language	English