9 Messages
Maschinenfabrik Reinhausen 2014 1333550953/00 EN TAPCON® 230 pro
No. Event (yel-
low/red)
Event message Remark
36 Yellow Tap position limit reached or
exceeded
Message is displayed if the set tap position limit
has been reached or exceeded.
37 Yellow Negative active power Message is displayed if the active power is nega-
tive.
38 Yellow No connection to communi-
cation interface card
Message is displayed if communication to the com-
munication interface card IEC 61850 card is not
possible.
Table 44: Event message
To Next Page
