1 Introduction
Maschinenfabrik Reinhausen 2014 93550953/00 EN TAPCON® 230 pro
Hazard communication system
Warnings in this technical file are displayed as follows.
Warning relating to section
Warnings relating to sections refer to entire chapters or sections, sub-sec-
tions or several paragraphs within this technical file. Warnings relating to
sections use the following format:
WARNING
Type and source of danger
Consequences
► Action
► Action
Embedded warning
Embedded warnings refer to a particular part within a section. These warn-
ings apply to smaller units of information than the warnings relating to sec-
tions. Embedded warnings use the following format:
DANGER! Instruction for avoiding a dangerous situation.
Signal words and pictograms
The following signal words are used:
Signal
word
Meaning
DANGER Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could
result in injury.
NOTICE Indicates measures to be taken to prevent damage to
property.
Table 1: Signal words in warning notices
Pictograms warn of dangers:
Pictogram Meaning
Warning of a danger point
1.5.1
1.5.1.1
1.5.1.2
1.5.1.3
To Next Page
Loading...
